Retarder

Description

The SYH_3, proposed and developed latterlyadapts to cementing in mid and hight temperature condition. Under 90~220℃, it can act with the cement particle surface ,so it prevents the cement hydrating, prolongs the thickening time of slurry.SYH_3 has very well compatibility with other additives in cement slurry. There is no effect on cement compressive strength when curing temperature is higher than BHCT. There is certain effect on cement compressive strength when curing temperature is lower than BHCT.

SYH_3 can be applied to API oil_well cement. Mixed with density adjustor, such as microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. It is suggested to be used together with SY series fluid loss control agents and dispersant SYJZ_1, So as to get cementing slurry with excellent combination property.

Fluid-loss Additive For Oil Well Cement

Description

SWJ_6 is one kind of high molecule weight polymer mixed with some assistant materials. In cement slurry ,it can be adsorbed onto the partical surface effectively, change physical chemistry performance. forming a cross_linked net among polymer molecules. Then it can form a compact film when the certain pressure differential occurred between the slurry and the formation. The slurry applied SWJ_6 has leak_protected and anti_migration functions. Mixed with proper thickening_time adjustor, the slurry could meet the operating standards.

SWJ_6can be applied to API oil_well cement. It can only be used by dry mixing peocess. Mixed with microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. Both fresh water and seawater can be used in the slurry.

Fluid-loss Additive For Oil Well Cement

Description

SWJ_6 is one kind of high molecule weight polymer mixed with some assistant materials. In cement slurry ,it can be adsorbed onto the partical surface effectively, change physical chemistry performance. forming a cross_linked net among polymer molecules. Then it can form a compact film when the certain pressure differential occurred between the slurry and the formation. The slurry applied SWJ_6 has leak_protected and anti_migration functions. Mixed with proper thickening_time adjustor, the slurry could meet the operating standards.

SWJ_6can be applied to API oil_well cement. It can only be used by dry mixing peocess. Mixed with microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. Both fresh water and seawater can be used in the slurry.

Universal Fluid Loss Additive

http://www.cement-additives.com/pid11311140/Universal+Fluid+Loss+Additive.htm

Description

SYJ_4 is one kind of high molecule weight polymer mixed with some assistant materials. In cement slurry ,it can be adsorbed onto the partical surface effectively, change physical chemistry performance. forming a cross_linked net among polymer molecules. Then it can form a compact film when the certain pressure differential occurred between the slurry and the formation. The slurry applied SYJ_4 has leak-protected and anti-migration functions. Mixed with proper thickening-time adjustor, the slurry could meet the operating standards.

SYJ_4 can be applied to API oil_well cement. It can only be used by dry mixing peocess. Mixed with microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. Both fresh water and seawater can be used in the slurry. It is suggested that SWJ_4 can be used with retarder SYH-1, SYH-3etc.

Oil Well Cement Additive

http://www.cement-additives.com/pid11311136/Oil+Well+Cement+Additive.htm

Description

SYJ_3 is an update soluble polymer which is synthesized and designed to control slurry fluid loss. Through the double role of absorbing and accumulating, SYJ_3 forms a kind of weak_cross_linked colloid in the slurry. So it can inlay the mud_cake steadily, and stick on the surface of cement particles to minimize its micro porous. Thus it effectively controls the fluid_loss of slurry through tincreasing the slurry viscosity and decreasing permeability of mud_cake. This update fluid loss controller can be applied in wide working temperature range and salt_resistant. Mixed with compatible dispersant, retarder, etc. it could protect the oil and gas zone and leading successful cementing operation.

SYJ_3 can be applied to API oil_well cement. And it can only be used by wet mixing process. Mixed with density adjustor, such as microsphere, bentonite, flyash, ilmenite, barite, it could mixed into slurry with different density. It is suggested that SYJ_3 can be used with retarder SYH_1, SYH_5, etc

Fluid-loss Additive For Oil Well Cement

Description

SYJ_2 is one kind of high molecule weight polymer mixed with some assistant materials. In cement slurry ,it can be adsorbed onto the partical surface effectively, change physical chemistry performance, forming a cross-linked net among polymer molecules. Then it can form a compact film when certain pressure differential occurred between the slurry and the formation. The slurry applied SWJ-2 has leak-protected and anti-migration functions. Mixed with proper thickening-time adjustor, the slurry could meet the operating standards.

SYJ_2 can be applied to API oil_well cement. It can only be used by dry mixing process. Mixed with microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. Only fresh water can be used in the slurry. It is suggested that SWJ-2 can be used with retarder SYH-1, SYH-3etc.

Fluid-loss Additive For Oil Well Cement

Description

SYJ_2 is one kind of high molecule weight polymer mixed with some assistant materials. In cement slurry ,it can be adsorbed onto the partical surface effectively, change physical chemistry performance, forming a cross-linked net among polymer molecules. Then it can form a compact film when certain pressure differential occurred between the slurry and the formation. The slurry applied SWJ-2 has leak-protected and anti-migration functions. Mixed with proper thickening-time adjustor, the slurry could meet the operating standards.

SYJ_2 can be applied to API oil_well cement. It can only be used by dry mixing process. Mixed with microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. Only fresh water can be used in the slurry. It is suggested that SWJ-2 can be used with retarder SYH-1, SYH-3etc.

Fluid-loss Additive For Oil Well Cement

Description

SYJ_1 is one kind of high molecule weight polymer mixed with some special materials. It can stick on the surface of cement particles and modify the physical and chemical function of cement particles. So it forms a net aggregate with the cement particles as its knots. It narrows the micro porous and forms a compact filter cake, so it can control the fluid loss effectively. The slurry which is applied SWJ-1 has leak-protection and anti-migration functions. Mixed with appropriate thickening-time adjustor, the slurry could meet the operating standards.

SYJ_1 can be applied to any class of API oil_well cement. It can be used by wet mixing and dry mixing. Mixed with extender material, such as microsphere, bentonite, flyash, ilmenite, barite, it could be mixed into different density. Both fresh water and seawater can be used in the slurry. When it is used with seawater, we must increase the quantity of the dispersant. It is suggested that SYJ-1 can be used with retarder SYH-1, SYH-3etc.